4:33 a.m.
On Sat, Aug 19, 2006 at 04:50:53PM +0930, Clytie Siddall wrote:
Hi :)
I'm unsure where to send this, so I hope either Nicolas or Martin
will read it here.
I think we both read this list, but po4a-devel(a)lists.alioth.debian.org
is probably more suitable.
I've recently migrated from powerpc to x86 (Intel-based Macbook
running Mac OSX 10.4.7, all updates current), and I'm rebuilding my
software base.
I've tried to install po4a, but on "make", I get this error:
___
Pearl:/po4a-0.27.2 clytie$ sudo make
perl Build.PL
Can't locate Module/Build.pm in @INC (@INC contains: /sw/lib/
perl5/5.8.6/darwin-thread-multi-2level /sw/lib/perl5/5.8.6 /sw/lib/
perl5 /sw/lib/perl5/darwin /System/Library/Perl/5.8.6/darwin-thread-
multi-2level /System/Library/Perl/5.8.6 /Library/Perl/5.8.6/darwin-
thread-multi-2level /Library/Perl/5.8.6 /Library/Perl /Network/
Library/Perl/5.8.6/darwin-thread-multi-2level /Network/Library/Perl/
5.8.6 /Network/Library/Perl /System/Library/Perl/Extras/5.8.6/darwin-
thread-multi-2level /System/Library/Perl/Extras/5.8.6 /Library/Perl/
5.8.1/darwin-thread-multi-2level /Library/Perl/5.8.1 .) at Build.PL
line 3.
BEGIN failed--compilation aborted at Build.PL line 3.
make: *** [Build] Error 2
Pearl:/po4a-0.27.2 clytie$
___
If you're using fink, there is a module-build-pm package.
I unfortunately destroyed my MacOS installation, so I won't be able to
test soon.
I don't know how to install perl modules on macos.
Module::Build is common module and can be installed with CPAN.
Hope this helps,
--
Nekral
2:38 a.m.
New subject: [Po4a-devel] Re: [Translation-i18n] po4a build error
On 19/08/2006, at 7:03 PM, Nicolas François wrote:
On Sat, Aug 19, 2006 at 04:50:53PM +0930, Clytie Siddall wrote:
> Hi :)
>
> I'm unsure where to send this, so I hope either Nicolas or Martin
> will read it here.
I think we both read this list, but po4a-devel(a)lists.alioth.debian.org
is probably more suitable.
Thanks. If I have any further problems, it should probably become my
52nd mailing list. :(
>
> BEGIN failed--compilation aborted at Build.PL line 3.
> make: *** [Build] Error 2
> Pearl:/po4a-0.27.2 clytie$
> ___
If you're using fink, there is a module-build-pm package.
Ah. Yes, I'm using fink, and since I've just migrated architectures,
some things didn't travel well. I had to delete my /sw dir. and
rebuild. Lots of things missing, which I only find out when I try to
do different tasks.
I unfortunately destroyed my MacOS installation,
:o
so I won't be able to
test soon.
I don't know how to install perl modules on macos.
Module::Build is common module and can be installed with CPAN.
The fink archive mirror isn't in a good mood. I'll have to keep on
trying. I haven't used CPAN... <googling> ... hmm. I'll try that.
Thanks! :)
from Clytie (vi-VN, Vietnamese free-software translation team / nhóm
Việt hóa phần mềm tự do)
http://groups-beta.google.com/group/vi-VN
6:20 a.m.
New subject: [Po4a-devel] Re: [Translation-i18n] po4a build error
Answering my own mail, here... ;)
On 20/08/2006, at 5:08 PM, Clytie Siddall wrote:
> I don't know how to install perl modules on macos.
> Module::Build is common module and can be installed with CPAN.
The fink archive mirror isn't in a good mood. I'll have to keep on
trying. I haven't used CPAN... <googling> ... hmm. I'll try that.
Thanks! :)
I got CPAN set up: very nice. I think po4a installed OK in the end,
but po4a did complain that it needed three other modules:
Checking prerequisites...
- ERROR: Text::WrapI18N is not installed
- ERROR: SGMLS is not installed
- ERROR: Locale::gettext is not installed
I was able to install the first and the last, but when I tried to
install SGMLS, CPAN said:
Package comes with a Makefile and without a Makefile.PL.
We'll try to build it with that Makefile then.
CPAN.pm: Going to build D/DM/DMEGG/SGMLSpm-1.03ii.tar.gz
if [ ! -d /usr/local/lib/perl5/SGMLS ]; then\
mkdir /usr/local/lib/perl5/SGMLS; \
chmod a+x /usr/local/lib/perl5/SGMLS; \
fi
mkdir: /usr/local/lib/perl5: No such file or directory
chmod: /usr/local/lib/perl5/SGMLS: No such file or directory
make: *** [/usr/local/lib/perl5/SGMLS] Error 1
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Is this some more missing software? I do have perl.
Pearl:/po4a-0.27.2 clytie$ which perl
/usr/bin/perl
Pearl:/po4a-0.27.2 clytie$ perl --version
This is perl, v5.8.6 built for darwin-thread-multi-2level
And is it likely to disadvantage po4a, not having that module for now?
Thankyou very much for your help with this, and for the introduction
to CPAN (which I am enjoying considerably). :)
from Clytie (vi-VN, Vietnamese free-software translation team / nhóm
Việt hóa phần mềm tự do)
http://groups-beta.google.com/group/vi-VN
8:46 a.m.
New subject: [Po4a-devel] Re: [Translation-i18n] po4a build error
On Sun, Aug 20, 2006 at 08:50:45PM +0930, Clytie Siddall wrote:
I got CPAN set up: very nice. I think po4a installed OK in the end,
but po4a did complain that it needed three other modules:
> Checking prerequisites...
> - ERROR: Text::WrapI18N is not installed
> - ERROR: SGMLS is not installed
> - ERROR: Locale::gettext is not installed
I was able to install the first and the last, but when I tried to
install SGMLS, CPAN said:
> Package comes with a Makefile and without a Makefile.PL.
> We'll try to build it with that Makefile then.
>
> CPAN.pm: Going to build D/DM/DMEGG/SGMLSpm-1.03ii.tar.gz
>
> if [ ! -d /usr/local/lib/perl5/SGMLS ]; then\
> mkdir /usr/local/lib/perl5/SGMLS; \
> chmod a+x /usr/local/lib/perl5/SGMLS; \
> fi
> mkdir: /usr/local/lib/perl5: No such file or directory
> chmod: /usr/local/lib/perl5/SGMLS: No such file or directory
> make: *** [/usr/local/lib/perl5/SGMLS] Error 1
> /usr/bin/make -- NOT OK
> Running make test
> Can't test without successful make
> Running make install
> make had returned bad status, install seems impossible
Is this some more missing software? I do have perl.
SGMLS's Makefile expects to find the perl library in /usr/local/lib/perl5,
which is not the case in your configuration. There may be a mean to
specify it where it will find perl (changing the Makefile is easy, but I
don't know how to do it with CPAN).
> Pearl:/po4a-0.27.2 clytie$ which perl
> /usr/bin/perl
> Pearl:/po4a-0.27.2 clytie$ perl --version
> This is perl, v5.8.6 built for darwin-thread-multi-2level
And is it likely to disadvantage po4a, not having that module for now?
It's only required for the po4a's Sgml module.
If you do not intent to use this module, then you won't notice any
issue (well, at least not caused by a missing SGMLS module;).
Kind Regards,
--
Nekral
6465
days inactive
6466
days old
3 comments
2 participants
participants (2)
-
Clytie Siddall -
Nicolas François