From martin.quinson at imag.fr Mon Jan 24 01:47:37 2005
Content-Type: multipart/mixed; boundary="===============5186271473697297500=="
MIME-Version: 1.0
From: Martin Quinson <martin.quinson at imag.fr>
To: devel at lists.po4a.org
Subject: [Po4a-devel]From Debian BTS: Bug#291831: po4a: some errors with with
 d-i manual's xml files
Date: Mon, 24 Jan 2005 08:08:27 +0100
Message-ID: <20050124070827.GA19507@papagos>

--===============5186271473697297500==
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

Hello,

I just received this from the Debian BTS. Jordi, it looks like your first
bug report ;)

I'd say that something is going wrong with the comment containing tags in
the Xml module. Could you please look at it (or tell us what we can do to
help you -- don't want to step on your feet) ?

I would also rewrite the code around 471 to:
unless (defined($name) && $name eq $tag) {
    die "po4a::xml: ".
    	sprintf(dgettext("po4a","Unexpected closing tag </%s> found in %s....";
}

it would avoid the use of uninitialized value the bug report speaks about.


Thanks for your time, =

Mt.

----- Forwarded message from "Carlos Z.F. Liu" <carlosliu(a)users.sourcefor=
ge.net> -----

Subject: Bug#291831: po4a: some errors with with d-i manual's xmlw files
X-Debian-PR-Package: po4a
From: "Carlos Z.F. Liu" <carlosliu(a)users.sourceforge.net>
To: Debian Bug Tracking System <submit(a)bugs.debian.org>
X-Mailer: reportbug 3.6
Date: Mon, 24 Jan 2005 04:06:24 +1300

Package: po4a
Version: 0.19-1
Severity: normal


Here are 2 problems with xml files in d-i manual (both sarge and trunk
branch in SVN).

1. Can't generate .po file from en/boot-installer/i386.xml, po4a
reported following msg:

    Use of uninitialized value in string ne at
    /usr/share/perl5/Locale/Po4a/Xml.pm line 471.
    po4a::xml: Unexpected closing tag </para> found in
    en/boot-installer/i386.xml:231. The main document may be wrong.

After a careful recheck, I think the file is 100% valid, and I can
generate HTML from it without any problem. The tricky thing is that many
</para><para> pairs were commented by <!-- --> in the document. Perhaps,
po4a didn't handle then correctly. (I guess ;-)


2. Another two files, en/using-d-i/modules/baseconfig.xml and
en/using-d-i/modules/os-prober.xml. po4a can produce pot file from xml,
but it will ignore the last paragraph after a <!-- xxxxx --> comment.
Then, after I translated po files and convert them back to xml, those
generated xml files are invalid. Please look at attachments to know
what I mean.


-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (500, 'unstable'), (101, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.9
Locale: LANG=3Den_NZ.UTF-8, LC_CTYPE=3Dzh_CN.UTF-8 (charmap=3DUTF-8)

Versions of packages po4a depends on:
ii  gettext                   0.14.1-8       GNU Internationalization utili=
ties
ii  liblocale-gettext-perl    1.01-17        Using libc functions for inter=
nati
ii  libsgmls-perl             1.03ii-31      Perl modules for processing SG=
ML p
ii  perl [perl5]              5.8.4-5        Larry Wall's Practical Extract=
ion =

ii  perl-modules              5.8.4-5        Core Perl modules
ii  sp                        1.3.4-1.2.1-43 James Clark's SGML parsing too=
ls

-- no debconf information

<!-- retain these comments for translator revision tracking -->
<!-- original version: 24626 -->
<!-- copied version: 24573 -->

  <sect2 arch=3D"i386"><title>Booting from a CD-ROM</title>

&boot-installer-intro-cd.xml;

<!-- We'll comment the following section until we know exact layout -->
<!-- =

CD #1 of official Debian CD-ROM sets for &arch-title; will present a
<prompt>boot:</prompt> prompt on most hardware. Press
<keycap>F3</keycap> to see the list of kernel options available
from which to boot. Just type your chosen flavor name (idepci,
vanilla, compact, bf24) at the <prompt>boot:</prompt> prompt
followed by &enterkey;.

</para><para>

If your hardware doesn't support booting of multiple images, put one
of the other CDs in the drive. It appears that most SCSI CD-ROM drives =

do not support <command>isolinux</command> multiple image booting, so users
with SCSI CD-ROMs should try either CD2 (vanilla) or CD3 (compact), =

or CD5 (bf2.4). =


</para><para>

CD's 2 through 5 will each boot a =

different ``flavor'' depending on which CD-ROM is
inserted. See <xref linkend=3D"kernel-choice"/> for a discussion of the
different flavors.  Here's how the flavors are laid out on the
different CD-ROMs:

<variablelist>
<varlistentry>
<term>CD 1</term><listitem><para>

Allows a selection of kernel images to boot from (the idepci flavor is
the default if no selection is made). =


</para></listitem></varlistentry>
<varlistentry>
<term>CD 2</term><listitem><para>

Boots the `vanilla' flavor.

</para></listitem></varlistentry>
<varlistentry>
<term>CD 3</term><listitem><para>

Boots the `compact' flavor.

</para></listitem></varlistentry>
<varlistentry>
<term>CD 4</term><listitem><para>

Boots the `idepci' flavor.

</para></listitem></varlistentry>
<varlistentry>
<term>CD 5</term><listitem><para>

Boots the `bf2.4' flavor.

</para></listitem></varlistentry>

 </variablelist>

</para><para>

-->

  </sect2>

<!-- FIXME the documented procedure does not exactly work, commented out
     until fixes

  <sect2 arch=3D"i386" id=3D"install-from-dos">
  <title>Booting from a DOS partition</title>

&boot-installer-intro-hd.xml;

<para>

Boot into DOS (not Windows) without any drivers being loaded.  To do
this, you have to press <keycap>F8</keycap> at exactly the right
moment (and optionally select the `safe mode command prompt only'
option).  Enter the subdirectory for the flavor you chose, e.g.,

<informalexample><screen>

cd c:\install

</screen></informalexample>.  =


Next, execute <command>install.bat</command>.
The kernel will load and launch the installer system. =


</para><para>

Please note, there is currently a loadlin problem (#142421) which
precludes <filename>install.bat</filename> from being used with the
bf2.4 flavor. The symptom of the problem is an
<computeroutput>invalid compressed format</computeroutput> error.

</para>
  </sect2>

END FIXME -->

  <sect2 arch=3D"i386" id=3D"boot-initrd">
  <title>Booting from linux using <command>LILO</command> or
  <command>GRUB</command></title>

<para>
To boot the installer from hard disk, you must first download
and place the needed files as described in <xref linkend=3D"boot-drive-file=
s"/>.
</para>

<para>
If you intend to use the hard drive only for booting and then
download everything over the network, you should download the
<filename>netboot/debian-installer/i386/initrd.gz</filename> file and its c=
orresponding kernel.
This will allow you
to repartition the hard disk from which you boot the installer, although
you should do so with care.
</para>

<para>
Alternatively, if you intend to keep an existing partition on the hard
drive unchanged during the install, you can download the
<filename>hd-media/initrd.gz</filename>
file and its kernel, as well as copy a CD iso to the drive (make sure the
file is named ending in ".iso". The installer can then boot from the drive
and install from the CD image, without needing the network.
</para>

<para>
For <command>LILO</command>, you will need to configure two
essential things in <filename>/etc/lilo.conf</filename>:
<itemizedlist>
<listitem><para>

to load the <filename>initrd.gz</filename> installer at boot time;

</para></listitem>
<listitem><para>

have the <filename>vmlinuz</filename> kernel use a RAM disk as
its root partition.

</para></listitem>
</itemizedlist>

Here is a <filename>/etc/lilo.conf</filename> example:

</para><para>

<informalexample><screen>

image=3D/boot/newinstall/vmlinuz
       label=3Dnewinstall
       initrd=3D/boot/newinstall/initrd.gz
       root=3D/dev/ram0
       append=3D"devfs=3Dmount,dall ramdisk_size=3D17000"

</screen></informalexample>

For more details, refer to the
<citerefentry><refentrytitle>initrd</refentrytitle>
<manvolnum>4</manvolnum></citerefentry> and
<citerefentry><refentrytitle>lilo.conf</refentrytitle>
<manvolnum>5</manvolnum></citerefentry> man pages. Now run
<userinput>lilo</userinput> and reboot.

</para><para>

The procedure for <command>GRUB</command> is quite similar. Locate your
<filename>menu.lst</filename> in the <filename>/boot/grub/</filename>
directory (sometimes in the <filename>/boot/boot/grub/</filename>),
add the following lines:

<informalexample><screen>

title  New Install
kernel (hd0,0)/boot/newinstall/vmlinuz root=3D/dev/ram0 devfs=3Dmount,dall =
ramdisk_size=3D17000
initrd (hd0,0)/boot/newinstall/initrd.gz

</screen></informalexample>

and reboot. Note that the value of the <userinput>ramdisksize</userinput>
may need to be adjusted for the size of the initrd image. =

>From now on, there should be no difference between <command>GRUB</command>
or <command>LILO</command>.

</para>
  </sect2>

  <sect2 arch=3D"i386" id=3D"usb-boot">
  <title>Booting from USB memory stick</title>
<para>

Lets assume you have prepared everything from <xref
linkend=3D"boot-dev-select"/> and <xref linkend=3D"boot-usb-files"/>.  Now
just plug your USB stick into some free USB connector and reboot the
computer.  The system should boot up, and you should be presented with
the <prompt>boot:</prompt> prompt.  Here you can enter optional boot
arguments, or just hit &enterkey;.

</para><para>

In case your computer doesn't support booting from USB memory devices,
you can still use a single floppy to do the initial boot and then
switch to USB. Boot your system as described in <xref linkend=3D"floppy-boo=
t"/>;
the kernel on the boot floppy should detect your USB stick automatically.
When it asks for the root floppy, simply press &enterkey;. You should see
&d-i; starting.

</para>
  </sect2>

  <sect2 arch=3D"i386" id=3D"floppy-boot">
  <title>Booting from Floppies</title>
<para>

You will have already downloaded the floppy images you needed and
created floppies from the images in <xref linkend=3D"create-floppy"/>.
<!-- missing-doc FIXME If you need to, you can also modify the boot floppy;=
 see =

<xref linkend=3D"rescue-replace-kernel"/>. -->

</para><para>

To boot from the installer boot floppy, place it in the primary floppy
drive, shut down the system as you normally would, then turn it back
on.

</para><para>

For installing from a LS-120 drive (ATAPI version) with a set of
floppies, you need to specify the virtual location for the floppy
device.  This is done with the <emphasis>root=3D</emphasis> boot
argument, giving the device that the ide-floppy driver maps the device
to. For example, if your LS-120 drive is connected as the first IDE
device (master) on the second cable, you enter
<userinput>linux root=3D/dev/hdc</userinput> at the boot prompt.
Installation from LS-120 is only supported by 2.4 and later kernels.

</para><para>

Note that on some machines, <keycombo><keycap>Control</keycap>
<keycap>Alt</keycap> <keycap>Delete</keycap></keycombo> does not
properly reset the machine, so a ``hard'' reboot is recommended.  If
you are installing from an existing operating system (e.g., from a DOS
box) you don't have a choice. Otherwise, please do a hard reboot when
booting.

</para><para>

The floppy disk will be accessed, and you should then see a screen
that introduces the boot floppy and ends with the <prompt>boot:</prompt>
prompt.

</para><para>

Once you press &enterkey;, you should see the message
<computeroutput>Loading...</computeroutput>, followed by
<computeroutput>Uncompressing Linux...</computeroutput>, and
then a screenfull or so of information about the hardware in your
system.  More information on this phase of the boot process can be
found below in <xref linkend=3D"kernel-msgs"/>.

</para><para>

After booting from the boot floppy, the root floppy is
requested. Insert the root floppy and press &enterkey;, and the
contents are loaded into memory. The installer program
<command>debian-installer</command> is automatically launched.

</para>
  </sect2>
  =

  <sect2 arch=3D"i386" id=3D"boot-tftp"><title>Booting with TFTP</title>
 =

&boot-installer-intro-net.xml;
 =

<para>

There are various ways to do a TFTP boot on i386.

</para>

   <sect3><title>NIC or Motherboard that support PXE</title>
<para>

It could be that your Network Interface Card or Motherboard provides
PXE boot functionality.
This is a <trademark class=3D"trade">Intel</trademark> re-implemention
of TFTP boot. If so you may be able to configure your BIOS to boot from the
network.

</para>
   </sect3>
   =

   <sect3><title>NIC with network bootROM</title>
<para>

It could be that your Network Interface Card provides
TFTP boot functionality.

</para><para condition=3D"FIXME">

Let us (<email>&email-debian-boot-list;</email>) know how did you manage it.
Please refer to this document.

</para>
   </sect3>

   <sect3><title>Etherboot</title>
<para>

The <ulink url=3D"http://www.etherboot.org">etherboot project</ulink>
provides bootdiskettes and even bootroms that do a TFTPboot.

</para>
   </sect3>
  </sect2>

  <sect2 arch=3D"i386"><title>i386 Boot Parameters</title>
<para>

When the installer boots, you will be presented with the boot prompt,
<prompt>boot:</prompt>. You can do two things at the <prompt>boot:</prompt>
prompt. You can press the function keys <keycap>F1</keycap> through
<keycap>F10</keycap> to view a few pages of helpful information, or
you can press <keycap>Enter</keycap> to boot the system.

</para><para>

Information on boot parameters which might be useful can be found by
pressing <keycap>F3</keycap> through <keycap>F7</keycap>.  If you add any
parameters to
the boot command line, be sure to type the boot method (the default is
<userinput>linux</userinput>) and a space before the first parameter (e.g.,
<userinput>linux floppy=3Dthinkpad</userinput>). If you simply press &enter=
key;,
that's the same as typing <userinput>linux</userinput> without any special
parameters.

</para><para>

Some systems have floppies with ``inverted DCLs''. If you receive
errors reading from the floppy, even when you know the floppy is good,
try the parameter <userinput>floppy=3Dthinkpad</userinput>.

</para><para>

On some systems, such as the IBM PS/1 or ValuePoint (which have ST-506
disk drivers), the IDE drive may not be properly recognized.  Again,
try it first without the parameters and see if the IDE drive is
recognized properly.  If not, determine your drive geometry
(cylinders, heads, and sectors), and use the parameter
<userinput>hd=3D<replaceable>cylinders</replaceable>,<replaceable>heads</re=
placeable>,<replaceable>sectors</replaceable></userinput>.

</para><para>

If you have a very old machine, and the kernel hangs after saying
<computeroutput>Checking 'hlt' instruction...</computeroutput>, then
you should try the <userinput>no-hlt</userinput> boot argument, which
disables this test.

</para><para>

If your screen begins to show a weird picture while the kernel boots,
eg. pure white, pure black or colored pixel garbage, your system may
contain a problematic video card which does not switch to the
framebuffer mode properly.  Then you can use the boot parameter
<userinput>debian-installer/framebuffer=3Dfalse</userinput> or
<userinput>video=3Dvga16:off</userinput> to disable the framebuffer
console. Only the English
language will be available during the installation due to limited
console features. See <xref linkend=3D"boot-parms"/> for details.

</para>
  </sect2>


  <sect2 arch=3D"i386">
  <title>System freeze during the PCMCIA configuration phase</title>

<para>

Some laptop models produced by Dell are known to crash when PCMCIA device
detection tries to access some hardware addresses. Other laptops may display
similar problems. If you experience such a problem and you don't need PCMCIA
support during the installation, you can disable PCMCIA using the
<userinput>hw-detect/start_pcmcia=3Dfalse</userinput> boot parameter. You c=
an
then configure PCMCIA after the installation is completed and exclude the
resource range causing the problems.

</para><para>

Alternatively, you can boot the installer in expert mode. You will
then be asked to enter the resource range options your hardware
needs. For example, if you have one of the Dell laptops mentioned
above, you should enter <userinput>exclude port
0x800-0x8ff</userinput> here. There is also a list of some common
resource range options in the <ulink
url=3D"http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO-1.html#ss1.12"=
>System
resource settings section of the PCMCIA HOWTO</ulink>. Note that you
have to omit the commas, if any, when you enter this value in the
installer.

</para>
  </sect2>

  <sect2 arch=3D"i386">
  <title>System freeze while loading the USB modules</title>
<para>

The kernel normally tries to install USB modules and the USB keyboard driver
in order to support some non-standard USB keyboards. However, there are some
broken USB systems where the driver hangs on loading. A possible workaround
may be disabling the USB controller in your mainboard BIOS setup. Another o=
ption
is passing the <userinput>debian-installer/probe/usb=3Dfalse</userinput> pa=
rameter
at the boot prompt, which will prevent the modules from being loaded.

</para>
  </sect2>

<!-- retain these comments for translator revision tracking -->
<!-- original version: 21579 -->

   <sect3 id=3D"baseconfig">
   <title>Running <command>base-config</command> From Within &d-i;</title>

<para>

It is possible to configure the base system within the first stage
installer (before rebooting from the hard drive), by running
<command>base-config</command> in a <firstterm>chroot</firstterm>
environment. This is mainly useful for testing the installer and a
vast majority of people should avoid it.
<!-- Feel free to prove me I'm wrong -->

</para>
   </sect3>

# Debian GNU/Linux Installation Guide
# Original translator szjungle, 2004.
#
msgid ""
msgstr ""
"Project-Id-Version: d-i-manaul\n"
"POT-Creation-Date: 2005-01-21  4:19+1300\n"
"PO-Revision-Date: 2005-01-08 18:51+0800\n"
"Last-Translator: Jungle Ji <jungle(a)soforge.com>\n"
"Language-Team: debian-chinese-gb <debian-chinese-gb(a)lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=3Dutf-8\n"
"Content-Transfer-Encoding: 8bit\n"

# type: Content of: outside any tag (error?)
#: en/using-d-i/modules/baseconfig.xml:1
#, no-wrap
msgid "\n"
msgstr "\n"

# type: Content of: outside any tag (error?)
#: en/using-d-i/modules/baseconfig.xml:2
#, no-wrap
msgid ""
"\n"
"\n"
"   "
msgstr ""
"\n"
"\n"
"   "

# type: Content of: <sect3>
#: en/using-d-i/modules/baseconfig.xml:4
#, no-wrap
msgid ""
"\n"
"   "
msgstr ""
"\n"
"   "

# type: Content of: <sect3><title>
#: en/using-d-i/modules/baseconfig.xml:5
#, no-wrap
msgid "Running "
msgstr "??? &d-i; ???????????? "

# type: Content of: <sect3><para><command>
#: en/using-d-i/modules/baseconfig.xml:5
#: en/using-d-i/modules/baseconfig.xml:11
#, no-wrap
msgid "base-config"
msgstr "base-config"

# type: Content of: <sect3><title>
#: en/using-d-i/modules/baseconfig.xml:5
#, no-wrap
msgid " From Within &d-i;"
msgstr " "

# type: Content of: <sect3>
#: en/using-d-i/modules/baseconfig.xml:5
#, no-wrap
msgid ""
"\n"
"\n"
msgstr ""
"\n"
"\n"

# type: Content of: <sect3><para>
#: en/using-d-i/modules/baseconfig.xml:7
#, no-wrap
msgid ""
"\n"
"\n"
"It is possible to configure the base system within the first stage\n"
"installer (before rebooting from the hard drive), by running\n"
msgstr ""
"\n"
"?????????????????????????????????????????????????????????????????? (??????=
??????????????????)???\n"
"??????\n"

# type: Content of: <sect3><para>
#: en/using-d-i/modules/baseconfig.xml:11
#, no-wrap
msgid " in a "
msgstr " ??? "

# type: Content of: <sect3><para><firstterm>
#: en/using-d-i/modules/baseconfig.xml:11
#, no-wrap
msgid "chroot"
msgstr "chroot"

# type: Content of: <sect3><para>
#: en/using-d-i/modules/baseconfig.xml:11
#, fuzzy, no-wrap
msgid ""
"\n"
"environment. This is mainly useful for testing the installer and a\n"
"vast majority of people should avoid it.\n"
msgstr ""
"\n"
"???????????????????????????????????????????????????\n"
"??????????????????????????????????????????\n"

<!-- retain these comments for translator revision tracking -->
<!-- original version: 21579 -->

   <sect3 id=3D"baseconfig">
   <title>??? &d-i; ???????????? <command>base-config</command> </title>

<para>
?????????????????????????????????????????????????????????????????? (???????=
?????????????????)???
??????
<command>base-config</command> ??? <firstterm>chroot</firstterm>
environment. This is mainly useful for testing the installer and a
vast majority of people should avoid it.
<!-- Feel free to prove me I'm wrong -->

</para>
 Feel free to prove me I'm wrong -->
-->
<!-- retain these comments for translator revision tracking -->
<!-- original version: 22664 -->

   <sect3 id=3D"os-prober">
   <title>Detecting other operating systems</title>

<para>

Before a boot loader is installed, the installer will attempt to probe for
other operating systems which are installed on the machine. If it finds a
supported operating system, you will be informed of this during the boot
loader installation step, and the computer will be configured to boot this
other operating system in addition to Debian.

</para><para>

Note that multiple operating systems booting on a single machine is still
something of a black art. The automatic support for detecting and setting
up boot loaders to boot other operating systems varies by architecture and
even by subarchitecture. If it does not work you should consult your
boot manager's documentation for more information.

<!-- TODO: Maybe include some arch-dependent tables with supported OS'es he=
re -->

</para>

<note><para>

The installer may fail to detect other operating systems if the partitions =
on
which they reside are mounted when the detection takes place. This may occu=
r if
you select a mountpoint (e.g. /win) for a partition containing another oper=
ating
system in <command>partman</command>, or if you have mounted partitions man=
ually
from a console.

</para></note>

   </sect3>

<!-- retain these comments for translator revision tracking -->
<!-- original version: 22664 -->

   <sect3 id=3D"os-prober">
   <title>???????????????????????????</title>

<para>
???????????????????????????????????????????????????????????????????????????=
????????????????????????????????????
???????????????????????????????????????????????????????????????????????????=
??????????????????
??? Debian ????????????????????????????????????????????????????????????????=
??
</para><para>

?????????????????????????????????????????????????????????????????????
???????????????????????????????????????????????????????????????????????????=
????????????????????????????????????
???????????????????????????????????????????????????????????????????????????=
?????????

<!-- TODO: Maybe include some arch-dependent tables with supported OS'es he=
re -->

</para>

<note><para>

The installer may fail to detect other operating systems if the partitions =
on
which they reside are mounted when the detection takes place. This may occu=
r if
you select a mountpoint (e.g. /win) for a partition containing another oper=
ating
system in <command>partman</command>, or if you have mounted partitions man=
ually
from a console.

</para></note>

 TODO: Maybe include some arch-dependent tables with supported OS'es here -=
->
-->
# SOME DESCRIPTIVE TITLE
# Original translator szjungle, 2004.
# =

msgid ""
msgstr ""
"Project-Id-Version: d-i-manual\n"
"POT-Creation-Date: 2005-01-21  5:07+1300\n"
"PO-Revision-Date: 2004-12-09 11:52+0800\n"
"Last-Translator: Jungle Ji <jungle(a)soforge.com>\n"
"Language-Team: debian-chinese-gb <debian-chinese-gb(a)lists.debian.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=3Dutf-8\n"
"Content-Transfer-Encoding: 8bit\n"

# type: Content of: outside any tag (error?)
#: en/using-d-i/modules/os-prober.xml:1
#, no-wrap
msgid "\n"
msgstr "\n"

# type: Content of: outside any tag (error?)
#: en/using-d-i/modules/os-prober.xml:2
#, no-wrap
msgid ""
"\n"
"\n"
"   "
msgstr ""
"\n"
"\n"
"   "

# type: Content of: <sect3>
#: en/using-d-i/modules/os-prober.xml:4
#, no-wrap
msgid ""
"\n"
"   "
msgstr ""
"\n"
"   "

# type: Content of: <sect3><title>
#: en/using-d-i/modules/os-prober.xml:5
#, no-wrap
msgid "Detecting other operating systems"
msgstr "???????????????????????????"

# type: Content of: <sect3>
#: en/using-d-i/modules/os-prober.xml:5
#, no-wrap
msgid ""
"\n"
"\n"
msgstr ""
"\n"
"\n"

# type: Content of: <sect3><para>
#: en/using-d-i/modules/os-prober.xml:7
#, no-wrap
msgid ""
"\n"
"\n"
"Before a boot loader is installed, the installer will attempt to probe for=
\n"
"other operating systems which are installed on the machine. If it finds a\=
n"
"supported operating system, you will be informed of this during the boot\n"
"loader installation step, and the computer will be configured to boot this=
\n"
"other operating system in addition to Debian.\n"
"\n"
msgstr ""
"\n"
"??????????????????????????????????????????????????????????????????????????=
?????????????????????????????????????\n"
"??????????????????????????????????????????????????????????????????????????=
???????????????????\n"
"??? Debian ???????????????????????????????????????????????????????????????=
???\n"

# type: Content of: <sect3><para>
#: en/using-d-i/modules/os-prober.xml:15
#, no-wrap
msgid ""
"\n"
"\n"
"Note that multiple operating systems booting on a single machine is still\=
n"
"something of a black art. The automatic support for detecting and setting\=
n"
"up boot loaders to boot other operating systems varies by architecture and=
\n"
"even by subarchitecture. If it does not work you should consult your\n"
"boot manager's documentation for more information.\n"
"\n"
msgstr ""
"\n"
"\n"
"?????????????????????????????????????????????????????????????????????\n"
"??????????????????????????????????????????????????????????????????????????=
?????????????????????????????????????\n"
"??????????????????????????????????????????????????????????????????????????=
??????????\n"
"\n"

# type: Content of: <sect3><note><para>
#~ msgid ""
#~ "\n"
#~ "\n"
#~ "The installer may fail to detect other operating systems if the "
#~ "partitions on\n"
#~ "which they reside are mounted when the detection takes place. This may "
#~ "occur if\n"
#~ "you select a mountpoint (e.g. /win) for a partition containing another "
#~ "operating\n"
#~ "system in "
#~ msgstr ""
#~ "\n"
#~ "???????????????????????????????????????????????????????????????????????=
?????????????????????????\n"
#~ "??????????????????????????? "

# type: Content of: <sect3><note><para><command>
#~ msgid "partman"
#~ msgstr "partman"

# type: Content of: <sect3><note><para>
#~ msgid ""
#~ ", or if you have mounted partitions manually\n"
#~ "from a console.\n"
#~ "\n"
#~ msgstr ""
#~ " ??????????????????(??? /win)??????????????????????????????????????????=
?????????????????????????????????\n"


----- End forwarded message -----

--===============5186271473697297500==
Content-Type: application/pgp-signature
MIME-Version: 1.0
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename="signature.asc"

LS0tLS1CRUdJTiBQR1AgU0lHTkFUVVJFLS0tLS0KVmVyc2lvbjogR251UEcgdjEuMi40IChHTlUv
TGludXgpCgppRDhEQlFGQjlKN3JJaUMvTWVGRjh6UVJBbE1kQUo5a21zQnV6T0doNk5aUHNmTTN6
elhTa3lML09nQ2dtUTZKCnlsTmw2Q21RdlJtN21ocDAyd0ZiVlJRPQo9QkJITAotLS0tLUVORCBQ
R1AgU0lHTkFUVVJFLS0tLS0K

--===============5186271473697297500==--